Sony PDW-D1 Operation Manual page 122

the + sign changes to a – sign. (Click the –
sign to close the submenu display.)
Click a menu item to display the operating
screen for the menu item in the operating
section.
• Device information menu
Basic information: Shows product
information, system information,
and disc information (see page
123).
Hours Meter: Shows the cumulative
number of operating hours of this
unit (see page 124).
Version: Shows the firmware version
information (see page 124).
Alarm log: Shows the alarms generated
by this unit (see page 124).
• Setup menu
AV settings: Shows a window for setting
the operation of this unit, time code,
audio control, recording format, and
line mode (see page 124).
Owner setting: Shows a window for
setting UMID owner information
(see page 128).
Clip title settings: Shows a window for
assigning titles to clips
enabling or disabling use of user-
defined clip and clip list file
names
Battery mode setting: Shows a window
for setting the alarm of remaining
capacity of the battery pack in this
unit (see page 130).
Save/recall setup: Shows a window for
saving or recalling the AV, owner,
and battery mode settings (see page
131).
Date/time setting: Shows a window for
setting the date, time, and time zone
(see page 131).
• Disc operation menu
Format: Shows a window for formatting
a disc (see page 131).
122 5-2 Names and Functions of Parts
1)
and for
2)
(see page 129).
Delete clip: Shows a window for deleting
a clip or clips recorded on the disc
(see page 132).
1) This is supported from firmware version 1.4
and utility software version 1.10.
2) This is supported from firmware version 1.5
and utility software version 1.50.
c Operating section
Shows the operating window for the
function selected in the tree display.
Click the ? button to show help information
on the display (Windows only).
PC operation settings dialog
box (Windows only)
In the menu bar, select Settings > PC
operation settings, to open the PC operation
settings dialog box.
In this dialog box, set the following items.
• Language used for the user interface of
the utility software
• Enable/disable FAM connection
To set the language used
1
From the Language list, select the
desired language, and click the Set
button.
2
Exit the utility software, and restart it
(see page 119).
The language you selected in step 1 is
now reflected in the utility software
displays.
To enable or disable the FAM
connection
1
In the FAM operation section, select
either of the following for login, and
click the Set button.
• Permit: Enable the FAM connection.
(Select for an FAM connection.)
• Inhibit: Disable the FAM
connection. (Select for an AV/C
connection.)