8
Power the unit off, and then power it
on again.
The line mode selected in step 1
becomes available for use.
To change the line mode setting on
a Macintosh computer
1
Refer to "AV setting operations"
(page 127), and change the line mode
setting.
2
Click the Set button.
If a disc is present, it is automatically
ejected.
3
In the confirmation message box, click
the OK button.
4
Click the "Change Connection" button
to switch to "AVc/Log out."
5
Exit the utility software (see page
120).
6
Power the unit off, and then power it
on again.
The line mode selected in step 1
becomes available for use.
Owner setting
When using an extended UMID, set the
following owner information.
Item name
Country code An abbreviated
Organization
code
128
5-3 Details of Functions
Settings
alphanumeric string (up
to four bytes
alphanumeric strings)
according to the values
defined in ISO 3166-1.
A code registered with
the SMPTE registration
office (up to four bytes
alphanumeric strings)
Item name
Settings
User code
A code for user
identification (up to four
bytes alphanumeric
strings)
Country code
You can find your own country code on the
following web page.
Refer to ISO 3166-1:
http://www.iso.ch/iso/en/prods-services/
iso3166ma/02iso-3166-code-lists/list-
en1.html
Organization code
• Organization codes must be acquired by
applying to the SMPTE registration
office.
• When no organization code has been
acquired, it is forbidden to enter an
arbitrary string. As a rule, the code "00"
must be entered. Freelance operators who
do not belong to an origination should
~
enter "
."
• There are no problems in recording or
playing back audio-video signals, if an
organization code is not set.
User code
• The user code is registered with each
organization locally. It is usually not
centrally registered.
• This user code is determined by the
organization. The methods used depend
on the organization.
• User code cannot be entered when no
organization code has been entered.
Owner information setting
operations
To enter owner information: Using the
keyboard, enter alphanumeric
characters in the edit box for each item.
If an entry is less than four bytes, the
remainder is filled with space
characters (20h).