Hitachi EC1433H Handling Instructions Manual page 8

English
○ Do not install the machine in a dusty (wooden chips,
etc.) Place.
○ Install the machine in the appropriate direction.
Install it appropriately.
○ Never install the machine in the rain or in a place
splashed with water or exposed to high temperature.
(Fig. 1)
Using it in the wet condition could cause an electric
shock or a short-circuit, resulting in a fi re due to burnout
or ignition.
2. Name of parts
Pressure-reduction valve adjustment
handle (L) (GRAY cap)
Pressure gauge for
indicating the set
reduction valve pressure
(2 gauges)
Pressure gauge in the tank
8
Power switch
Air tank
Pressure-reduction valve adjustment
handle (H) (RED cap)
○ Never block a ventilation opening or use the
machine in a box or a narrow place(in a vehicle, etc.)
(Fig. 5)
Neglect of this may generate abnormal heat, causing a
trouble or an accident.
Install the compressor at the distance of 1 m or more from
the wall to secure suffi cient ventilation and cooling.
○ Never sit or place an object on the top of the
machine.
Neglect of this could cause a trouble or break it.
○ Do not use the compressor in any place where
the temperature is 5°C or less or the ambient
temperature exceeds +40°C.
( )
"I" : ON
"O" : OFF
Drain lever
Handle
Drain tube
Power cord
Power plug
High-pressure air socket
(for Hitachi high pressure tools)
Regular-pressure air socket
(for Regular pressure tools)