Wireless Security - iBall baton iB-WRA300N3GT User Manual

300M Wireless-N ADSL2+ 3G & Broadband Router

Wireless Security

Choose Network Setup > Wireless> Wireless Security and the following page appears.
The following table describes the parameters of this page:
Field
Encryption
WPA Authentication
Mode
Configure the wireless encryption mode. You can
choose None, WEP, WPA (TKIP), WPA (AES),
WPA2 (AES), WPA2 (TKIP), or WPA2 Mixed.
Wired equivalent privacy (WEP) encrypts data
frames before transmitting over the wireless
network.
Wi-Fi protected access (WPA) is a subset of
the IEEE802.11i security specification draft.
WPA2 Mixed is the collection of WPA and
WPA2 encryption modes. The wireless client
establishes the connection between the modem
through WPA or WPA2.
Key differences between WPA and WEP are user
authentication and improved data encryption.
Select Personal (Pre-Shared Key), enter the
pre-shared key in the Pre-Shared Key field.
41
Description
iB-WRA300N3GT