Hardware Connection; Adsl Connection - iBall baton iB-WRA300N3GT User Manual

300M Wireless-N ADSL2+ 3G & Broadband Router iB-WRA300N3GT
3

Hardware Connection

3.1

ADSL Connection

Method-I : Plug one end of the twisted-pair ADSL cable into the LINE port on the rear panel
of iB-WRA300N3GT, and insert the other end into the wall socket.
Method-II: You can use a ADSL splitter. External splitter can divide the data and voice, and
then you can access the Internet and make calls at the same time. The external splitter has
three ports:
1) Connect the Ethernet cable. Attach one end of a network cable to your computer's
LAN port or a regular hub/switch port, and the other end to the LAN port on the
iB-WRA300N3GT. (If you have the wireless NIC and want to use wireless connector, you
can skip the connection of LAN port.)
2) Power on the computers and LAN devices.
3) Configure the ADSL connection in the router as per your ISP settings available from your
ISP.
7