Wireless; Wireless Basic Settings - iBall baton iB-WRA300N3GT User Manual

300M Wireless-N ADSL2+ 3G & Broadband Router
The following table describes the parameters of this page.
Field
Global Address
Enable
M Flag
O Flag
Prefix Mode
DHCPv6 Mode
4.6.3

Wireless

Wireless Basic Settings

Choose Network Setup > Wireless > Basic Settings, the page shown in the following
figure appears. In this page, you can configure the parameters for wireless LAN clients
that may connect to the modem.
Specify the LAN global ipv6 address. It can be assigned by
ISP.
Enable or disable the Router Advertisement feature.
Enable or disable the "Managed address configuration" flag
in RA packet.
Enable or disable the "Other configuration" flag in RA
packet.
Specify the RA feature prefix mode:
"Auto": the RA prefix will use WAN dhcp-pd prefix;
"Manual": user will specify the prefix address, length,
preferred time and valid time.
Specify the dhcpv6 server mode:
"None": close dhcpv6 server;
"Manual": dhcpv6 server is opened and user specifies the
dhcpv6 server address pool and other parameters.
"Auto": dhcpv6 server is opened and it use WAN dhcp-pd
prefix to generate address pool.
38
Description
iB-WRA300N3GT