Philips YS534 User Manual page 17

troubleshooting
This chapter summarises the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, visit
www.philips.com/support for a list of frequently asked questions or contact the
Consumer Care Centre in your country.
Problem
The appliance
does not
work, even
though it is
connected to
the mains.
The appliance
does not
shave as well
as it used to.
The appliance
does not work
when I press
the on/off
button.
Possible cause
This appliance is not
designed to be used directly
from the mains.
The shaving heads are
damaged or worn.
The shaving heads are dirty.
Long hairs obstruct the
shaving heads.
Shaving foam or shaving gel
has accumulated in the
shaving heads.
The rechargeable battery is
empty.
EngliSh
Solution
Remove the adapter from the
wall socket and the small plug
from the appliance. You can now
switch on the appliance again.
Replace the shaving heads. See
chapter 'Replacement'.
Clean the cutters and guards
with the cleaning brush supplied.
See chapter 'Cleaning and
maintenance'.
Clean the cutters and guards
with the cleaning brush supplied.
See chapter 'Cleaning and
maintenance'.
Rinse the shaving heads
thoroughly with a sufficient
amount of water.
Recharge the battery. See
chapter 'Charging'.
17