Philips YS534 User Manual page 12

EngliSh
12
trimming
The trimming comb allows you to cut hair to different lengths.
Trimming comb
Small
Medium (YS534 only)
Large (YS534 only)
1 Switch off the appliance.
2 Snap the comb onto the body groomer attachment with the teeth pointing
in either direction. (Fig. 20)
3 Press the on/off button to switch on the appliance.
4 To trim the hair, move the appliance against the direction of hair
growth (Fig. 21).
Always make sure that the teeth of the comb point in the direction in which
you move the appliance.
grooming
1 If a trimming comb is still attached, remove it.
2 Press the on/off button to switch on the appliance.
3 Place the body groomer on the skin.
4 Move the appliance against the direction of hair growth with one hand,
while you stretch the skin with the other hand.
Make sure that the body groomer is always fully in contact with the skin.
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as
petrol or acetone to clean the shaver and its accessories.
Be careful with hot water. Always check if the water is not too hot, to prevent
your hands from getting burned.
Note: To prevent inflammation of your skin, you should clean the appliance thoroughly
on a regular basis.
Hair length after cutting
3mm
5mm
7mm