Philips YS534 User Manual page 11

1 Press the length selector (1) and then push it to the left or right (2) to
select the desired hair length setting. (Fig. 14)
2 Press the on/off button to switch on the appliance.
3 You can now start styling your beard. (Fig. 15)
Make sure that the front of the comb is fully in contact with the skin and move the
appliance against the direction of hair growth. You may want to try different positions
(upwards, downwards, or across), depending on the direction of hair growth.
using the beard styler attachment without comb
You can use the beard styler attachment without comb to contour or cut shapes
in beard hair.
1 Pull the comb off the beard styler attachment. (Fig. 16)
2 Press the on/off button to switch on the appliance.
3 You can now start contouring your beard. Be careful, the appliance cuts hair
very close to the skin, at a length of 1mm. (Fig. 17)
Bodygrooming
- Only use this body groomer attachment to groom your body hair. You can use
this attachment wet or dry to groom or trim hair on all parts of the body
below the neckline. Do not use this attachment to groom or trim facial hair or
scalp hair. The different attachments of this appliance are designed for specific
types of hair and body hair differs from facial hair or scalp hair (Fig. 18).
Take your time when you first start to groom sensitive areas. You have to acquire
practice with the appliance. Your skin also needs some time to adjust to the procedure.
The appliance does not work from the mains for safety reasons.
attaching the body groomer attachment
1 Make sure the appliance is switched off.
2 Pull the shaving attachment straight off the appliance (Fig. 12).
Do not twist the attachment while you pull it off the appliance.
3 Insert the lug of the body groomer attachment into the slot in the top of
the appliance. Press it downwards to attach it to the appliance (Fig. 19).
EngliSh
11