Installing The Oven - Miele H 387-1 B KAT Operating Instructions Manual

The oven is designed to be built into
a tall unit. If you wish to install it in a
base unit, the stainless steel rail
above the control panel must be re-
placed by a sealing strip. The seal-
ing strip offers additional protection
from any liquids that might spill
down from the worktop, and can be
purchased from the Miele Spare
Parts dept.
Do not fit insulation material inside
the housing unit. This would hinder
the intake of air to cool the appli-
ance.
74
Turn off the mains electricity supply
to the isolator.
^ Connect the oven to the electricity
supply by the isolator.
^ Place the oven into the oven housing
unit as far as the oven trim and align.
^ Open the oven door and using two
screws secure the oven to the side
walls of the housing unit through the
holes in the oven trim.
The appliance must only be oper-
ated when it has been built in.