Status Leds; Using The Rcu - Barco HDX User And Installation Manual

C
AUTION
5.6

Status LEDs

Overview
LED
Color status
Standby button Red on
Red toggles on/off
Green toggles on/off
Green on
Orange toggles on/off Projector is on, lamp power supply is off
White toggles on/off
Dimmed white
Pause button Red on
Green on
Dimmed white
Full white
Full white toggles
on/off
PWR (power Off
LED)
Red
Orange
Green
LMP (lamp Off
LED)
Red
Orange
Green
Green-Orange
ERR (error Off
LED)
Red toggles on/off
Orange toggles on/off Warning
IR Red
Green
5.7

Using the RCU

Pointing to the reflective screen
1. Point the front of the RCU to the reflective screen surface.
R5905032 HDX SERIES 16/06/2015
:
Never switch off the projector while the message 'Saving data ... ' is displayed !
Description
Projector is in standby
Projector startup failed, no lamp power supply
Projector starts up
Projector is on
From/To ECO standby
Projector powers up
Shutter is closed
Shutter is open
Shutter is closed, projector in standby
Shutter is undefined (shutter not open and not closed)
Shutter is closed during reset formatter
Projector powers up
Standby
ECO standby
Projector is on
Lamp is off
No lamp inserted
Lamp is on in ECO mode
Lamp is on in normal mode
Lamp is on in CLO mode
No error
Error
IR signal received
IR signal acknowledged
5. Getting started
61