Vibration Level; Slopes - Ransomes HR3300T Safety, Operation & Maintenance Manual

4 SPECIFICATION
4.4 HYDRAULIC SPECIFICATION
Description
Transmission
Forward
Reverse
Charge
Cutting
Forward
Reverse
Steering & Lift
Steering
Lift
Weight Transfer

4.5 VIBRATION LEVEL

When the machine was tested for hand/arm
vibration levels, the operator was seated in the
normal operating position with both hands on the
steering mechanism. The engine was running and
the cutting device was rotating with the machine
stationary.
The Machinery Safety Directive 98/37/EC
By compliance to:
The Lawnmower Standard EN836:1997
Referenced to Hand/Arm: EN1033:1996
Information Supplied for Physical Agents Directive
2002/44/EC
By reference to:
Hand/Arm Standards: BS EN ISO 5349-1 (2001)
BS EN ISO 5349-2 (2001)
Ransomes HR3300T
Series FR
Jacobsen HR3300T
Series FY
Hand / Arm Acceleration
Level
When the machine was tested for Whole Body
vibration levels, the operator was seated in the

4.6 SLOPES

DO NOT USE ON SLOPES GREATER THAN 14°
The slope 14° was calculated using static stability measurements according to the requirements of EN 836:1997
and is correct for machines without ROPS frame or ROPS cab and fitted with a rotary cutting deck.
en-12
SAFETY, OPERATORS & MAINTENANCE MANUAL
Litres / Min
95
19
-
68
45
10
10
-
Max. LH or RH
Accelerations m/s²
Mean Value of X, Y, Z Aeq
0.94 ± 0.56
Relief Valve Pressure
250bar
250bar
18bar
250bar
250bar
125bar
125bar
0 - 25bar
normal operating position with both hands on the
steering mechanism. The cutting device was rotating
with the machine driven in a straight line at 6 Km/hr on
a level freshly cut lawn.
The Machinery Safety Directive 98/37/EC
By compliance to:
Whole Body EN1032:2003
Information Supplied for Physical Agents Directive
2002/44/EC
By reference to:
Whole Body Standards BS EN ISO 2631-1 (1997)
Ransomes HR3300T
Series FR
Jacobsen HR3300T
Series FY
Whole Body Acceleration
Level
Ransomes HR3300T
Series FR
Jacobsen HR3300T
Series FY
Whole Body Acceleration
Level
Test Port Location
see section 8.6
see section 8.6
see section 8.6
see section 8.6
see section 8.6
see section 8.6
Max. Seat
Accelerations m/s²
Mean Value of X, Y, Z Aeq
1.20
Max. LH or RH Foot
Accelerations m/s²
Mean Value of X, Y, Z Aeq
1.77