Johnson 40-6502 Instruction Manual
Hide thumbs Also See for 40-6502:

Advertisement

3919H_Manuals 10/12/10 10:31 AM Page 1
Manual-Leveling Rotary Laser Level
Model Nos. 40-6502 and 40-6512
Instruction Manual
Congratulations on your choice of this Manual-Leveling Rotary Laser
Level. We suggest you read this instruction manual thoroughly before
using the instrument. Save this instruction manual for future use.
This is a Class IIIa laser tool and is manufactured to comply
with CFR 21, parts 1040.10 and 1040.11 as well as international
safety rule IEC 285.
©2010 Johnson Level & Tool - Rev. 1
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 40-6502 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Johnson 40-6502

  • Page 1 Save this instruction manual for future use. This is a Class IIIa laser tool and is manufactured to comply with CFR 21, parts 1040.10 and 1040.11 as well as international safety rule IEC 285. ©2010 Johnson Level & Tool - Rev. 1...
  • Page 2: Table Of Contents

    Manual-Leveling Rotary Laser Level “AA” Alkaline Batteries Wall/Ceiling Mount 8’ Grade Rod Detector with 2 “AAA” Batteries and Clamp Tinted Glasses Magnetic Target Elevating Tripod Instruction Manual with Warranty Card Hard Shell Carrying Case ©2010 Johnson Level & Tool - Rev. 1...
  • Page 3: Features And Functions

    Failure to do so, may void the warranty. DANGER! Class IIIa Laser Product Max. Power Output: Wavelength: 625-645nm THIS TOOL EMITS LASER RADIATION. DO NOT STARE INTO BEAM. AVOID DIRECT EYE EXPOSURE. ©2010 Johnson Level & Tool - Rev. 1...
  • Page 4 • Use only original Johnson ® parts and accessories purchased from your Johnson ® authorized dealer. Use of non-Johnson ® parts and accessories will void warranty. ©2010 Johnson Level & Tool - Rev. 1...
  • Page 5: Location/Content

    3919H_Manuals 10/12/10 10:31 AM Page 5 4. Location/Content of Warning Labels ©2010 Johnson Level & Tool - Rev. 1...
  • Page 6: Location Of Parts/Components

    Rotating beam Output Window output window Keypad Z-level Vial Z-vial calibrating hole Base unlock/lock DC 6V outlet knob Y-vial leveling knob X-level Vial Y-level Vial X-vial leveling knob 5/8” - 11 thread ©2010 Johnson Level & Tool - Rev. 1...
  • Page 7: Operating Instructions

    (scan & rotate mode LED (5) is on), laser is rotating. Small scan: Laser is in small scan (scan & rotate mode LED (5) blinks). Big scan: Laser is in big scan (scan & rotate mode LED (5) blinks). ©2010 Johnson Level & Tool - Rev. 1...
  • Page 8 (Note: when turning the power on, the laser is in its highest rotation speed) Press rotation speed decreases In the scan mode: Press scan moves in counterclockwise direction Press scan moves in clockwise direction ©2010 Johnson Level & Tool - Rev. 1...
  • Page 9: Using The Product

    2. Remove battery cover (rotate the battery compartment knob coun- terclockwise to the open position). 3. Put in 4 “AA” alkaline batteries following the polarity specified in the battery compartment. ©2010 Johnson Level & Tool - Rev. 1...
  • Page 10 5/8” - 11 tripod 3. Adjust the vial leveling knobs to center the bubble inside the X-vial and Y-vial. 4. Turn on the laser. 5. After finishing work, turn off the laser. ©2010 Johnson Level & Tool - Rev. 1...
  • Page 11 Sound function Short sound and solid sound LED indication Upper red, middle orange, middle green, down red Size 4.645” x 2.637” x 0.984” (118mm x 67mm x 25mm) Weight 0.253 lbs. (115g) ©2010 Johnson Level & Tool - Rev. 1...
  • Page 12 Power Key: Turn on/off the instrument 3. Battery Installation 1. Open the battery cover and put the batteries into the battery case according to the polarity shown in the battery slot. 2. Snap the battery cover back. ©2010 Johnson Level & Tool - Rev. 1...
  • Page 13 No Sound Note: 1. While detecting a horizontal laser beam, it is necessary to have the horizontal bubble vial centered, as the tilt of the detector will influence its receiving accuracy. ©2010 Johnson Level & Tool - Rev. 1...
  • Page 14 The horn will give two short sounds and the unit will power off automatically. 5. Accessories Usage • Connecting to the grade rod bracket ©2010 Johnson Level & Tool - Rev. 1...
  • Page 15 If unit comes into contact with water or other liquids, wipe it dry immediately. • Do not use unit around fire or expose it to fire in any way. ©2010 Johnson Level & Tool - Rev. 1...
  • Page 16: Self-Check & Fine Calibration

    6. Repeat this same procedure for the Y vial. Calibration Method Mark the middle point as O between X+ and X- on the wall. Using the X vial leveling knob, adjust the beam to the O point. ©2010 Johnson Level & Tool - Rev. 1...
  • Page 17 Key, adjust the vial bubble to the middle of the vial as shown below. Repeat the same procedure for the Y vial. 2.5 Metric Hex Key X Level Vial Calibrating Aperture Y Level Vial X Level Vial Y Level Vial Calibrating Aperture ©2010 Johnson Level & Tool - Rev. 1...
  • Page 18: Technical Specifications

    (130 x 130 x 156mm) Weight 1.653 lbs. (0.75Kg) Working Temperature 14°F to 113°F (-10°C to +45°C) Center Screw Thread 5/8" – 11 Rotation speeds 150-300 rpm Scanning mode Large, Small, Dot IP Protection Class ©2010 Johnson Level & Tool - Rev. 1...
  • Page 19: Application Demonstrations

    3919H_Manuals 10/12/10 10:31 AM Page 19 10. Application Demonstrations Ceiling installation Anti-static flooring installation Window installation Baseboard installation Hanging pictures Dormer installation ©2010 Johnson Level & Tool - Rev. 1...
  • Page 20: Care And Handling

    12. Product Warranty Johnson Level & Tool offers a three year limited warranty on each of its products. You can obtain a copy of the limited warranty for a Johnson Level & Tool product by contacting Johnson Level & Tool's Customer Service Department, as provided below, or by visiting our web site at www.johnsonlevel.com.
  • Page 21: Warranty Registration

    For further assistance, or if you experience problems with this product that are not addressed in this instruction manual, please contact our Customer Service Dept. In the U.S., contact Johnson Level & Tool’s Customer Service Department at 888-9-LEVELS. In Canada, contact Johnson Level & Tool’s Customer Service Department at 800-346-6682.
  • Page 22: Accessories

    NO WARRANTY. If you need any assistance in locating any accessories, please contact our Customer Service Department. In the U.S., contact Johnson Level & Tool’s Customer Service Department at 888-9-LEVELS. In Canada, contact Johnson Level & Tool’s Customer Service Department at 800-346-6682.

This manual is also suitable for:

40-6512

Table of Contents