Operating and installation instructions EGW 4050-14 / EGW 4050-29 EGW 4060-14 / EGW 4060-29 GHirZ To avoid the risk of accidents or damage to the appliance it is essential to read these operating instructions before it is installed and used for the first time.
Warning and Safety instructions This appliance should be To avoid the risk of accidents to the connected via a double pole fused appliance please read these spur connection unit or a fused plug instructions carefully before using it and switched socket. If you wish to for the first time.
Warning and Safety instructions Correct usage Never open the casing of the appliance. This appliance complies with all Tampering with electrical connections relevant legal safety requirements. or components is highly dangerous to Incorrect use can lead to personal the user and can cause operational injury and damage to property.
Warning and Safety instructions This appliance is not a toy! Do not Do not use the appliance to heat let children access the drawer or up the room. Due to the high its controls. Supervise its use by the temperatures radiated, objects near the elderly or infirm.
Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for disposal human health and to the environment.
Before using for the first time General notes Cleaning and heating up for the first time The plate warmer is intended exclusively for heating crockery. Before using for the first time proceed as follows: It uses a hot air warming system. A fan distributes heat given off by a heater ^ Wipe the appliance with a damp element evenly throughout the drawer.
Operation Controls Do not use the appliance to re-heat, cook or keep food or drinks warm. Condensation from the food or drinks could lead to corrosion in the appliance. Always use heat-resistant gloves to remove heated crockery from the drawer. The load bearing capacity of the appliance, irrespective of its height, is 25 kg maximum.
Operation Using the drawer Selecting a temperature ^ Place crockery inside the drawer. The temperature dial allows you to select any temperature between ^ Select the temperature required. approx. 30 and 80 °C. ^ Switch on the appliance (j). The temperature dial must only be The switch lights up.
Operation Heating up times Capacity Various factors will affect the heating up There a two different plate warming times: drawers which differ in height: – the material and thickness of the – EGW 40x0 - 14: 141 mm high. crockery –...
Operation EGW 4050 - 14 / EGW 4060 - 14 EGW 4050 - 29 / EGW 4060 - 29 – 6 place settings: – 12 place settings: C 28 cm C 28 cm 6 dinner plates 12 dinner plates C 10 cm C 22 cm 6 soup bowls 2 serving dishes...
Remove safe temperature before cleaning. any soiling straight away. ^ All surfaces and controls should be cleaned using a Miele E-Cloth or with The appliance front is susceptible to warm water and a little washing up scratches and abrasions.
The appliance front is susceptible to oven. Fire hazard. scratches and abrasions. Stainless steel surfaces can be cleaned using a Miele E-Cloth or with a proprietary non-abrasive cleaning agent designed specifically for use on stainless steel. N.B. Do not use stainless steel cleaning agents on the controls.
Problem solving guide If any of the following problems occur, Installation work and repairs to the advice of a qualified electrican or electrical components of this the Service Department must be appliance must only be carried out sought. by a suitably qualified and competent person in accordance with local and national safety .
– Your Miele dealer, or – the Miele Service Department (see address on back cover). When contacting the Service Department, please quote the model and serial number of your appliance, which are given on the data plate.
Installation Safety instructions for When building in the combination appliance, it is essential to follow installation the instructions given in the operating Before connecting the appliance to and installation instructions supplied the mains supply make sure that with it. the voltage and frequency correspond This equipment may only be used to the rating on the data plate.
Installation Positioning the appliance in The appliance is supplied with three metal trims which have an adhesive the housing unit underside. ^ Push the appliance into the housing These trims must be stuck on to the unit as far as the vapour strip and drawer so that they seal any gaps align it.
Installation Aligning the front of the plate warmer After building in the combination appliance, it may be necessary under certain circumstances to – align the front of the plate warmer – align the gap between the plate warmer and the combination appliance.
Installation Electrical connection Connection should be made via a double pole fused spur connection unit All electrical work should be carried or fused plug and switched socket out by a suitably qualified and which complies with national and local competent person, in strict safety regulations and the on/off switch accordance with current national should be easily accessible after the...
Installation Non-rewireable plugs BS 1363 Important The fuse cover must be refitted when The electrical safety of this appliance changing the fuse, and if the fuse cover can only be guaranteed when is lost, the plug must not be used until a continuity is complete between the suitable replacement is obtained.
Alteration rights reserved / 4306 M.-Nr. 06 155 950 / 02 en - GB...