Table of Contents
Advertisement
Operations flow
The operation flow of the extension unit is as follows.
z
Rack mounting
x
Connections
c
Installation of the hard disk
v
Formatting of the hard disk
b
n
Start operation
When necessary
Replacement of the hard disk
m
14
Startup
drives
drives
drives
Install the extension unit in the rack. (Page 15)
Go to step 2 when not installing in the rack.
Connect the extension unit to the recorder. (Page 17)
Turn on the power of the extension unit. (Page 18)
Turn on the power of the extension unit before turning on the power of the
recorder.
When using a network disk recorder, install the HDD units using the buttons
and checking the LCD on the front panel of the recorder. (Page 24)
When unformatted hard disk drives are installed, they will automatically be
formatted.
According to your needs, determine the operational mode. (Page 29)
Refer to the manuals provided with the recorder for further information.
When changing the assignment of the recording areas on the hard disk
drives, display the disk configuration menu from the setup menu and format
the hard disk drives.
Refer to the manuals provided with the recorder for further information.
When using a network disk recorder, if a hard disk drive fails, perform shut-
down process of the faulty disk using the buttons and checking the LCD on
the front panel. Then, replace the faulty disk and recover data. (Page 23 -
31)
Refer to the manuals provided with the recorder for further information.
Hide quick links:
Advertisement
Table of Contents
