Address Setting Mode Via The C.i.e; Flow Chart - Panasonic External Presentation unit 1728 Technical Description

Hide thumbs Also See for External Presentation unit 1728:

Table of Contents

Panasonic Electric Works Fire & Security Technology Europe AB

MEW00290 Rev: 1

6.2.1

6.3

Technical Description External Presentation unit 1728

For an ext. Presentation unit with SW mode 1728 - 1582, the address

can be set to 01-08. (Default is "01".)

Scroll to the wanted address with the push button "P1" (black).

Store the selected address with the push button "P2" (yellow) and the

unit will automatically restart and enter its normal operation mode.

Address setting mode via the c.i.e.

One specific ext. Presentation unit or all the ext. Presentation units

connected to the same line (RS485) can, in normal operation, from the

c.i.e. receive a command and get ready for the "Address setting"

directly. This is done via menu H5/A9, see Operating instructions for

the system respectively.

On the following page is a flow chart, showing the SW mode setting,

Language setting, Address setting, etc.

If the unit has no SW mode, i.e. "Not selected", it will not enter its normal

operation mode after the restart but start from the beginning again, ready for

the SW mode setting.

Table of Contents