3
Firmly depress the brake pedal and check that
on the multi-information display.
4
Press the "POWER" switch.
In the event that the "POWER" switch still cannot be operated, contact
your Toyota dealer.
Stopping the hybrid system
■
Shift the shift lever to P and press the "POWER" switch as you normally do
when stopping the hybrid system.
Replacing the key battery
■
As the above procedure is a temporary measure, it is recommended that the
electronic key battery be replaced immediately when the battery is depleted.
(P. 413)
Changing "POWER" switch modes
■
Release the brake pedal and press the "POWER" switch in
The hybrid system does not start and modes will be changed each time the
switch is pressed. (P. 187)
If the doors cannot be locked or unlocked by the smart key system
■
Lock and unlock the doors by the mechanical key or wireless remote control.
When the electronic key does not work properly
■
●
Make sure that the smart key system has not been deactivated in the cus-
tomization setting. If it is off, turn the function on.
(Customizable features P. 514)
●
Check if battery-saving mode is set. If it is set, cancel the function.
(P. 139)
8-2. Steps to take in an emergency
I n f o r ma t i o n P r o v i d e d b y :
477
is displayed
3
above.
8