Exterior
■
Make sure that the 12-volt battery terminals are not corroded and
that there are no loose connections, cracks, or loose clamps.
1
Terminals
2
Hold-down clamp
Installing the 12-volt battery cover
■
1
Install the 12-volt battery
cover.
1
Guides
2
Clips
Check if the clips and guides
on the back of the cover are
engaging properly if the cover
cannot be installed.
2
Install the 2 clips.
1
Push out the center part of
the clips
2
Insert the clips
3
Push in the center part of
the clips
Before recharging
■
When recharging, the 12-volt battery produces hydrogen gas which is flam-
mable and explosive. Therefore, observe the following precautions before
recharging:
●
If recharging with the 12-volt battery installed on the vehicle, be sure to dis-
connect the ground cable.
●
Make sure the power switch on the charger is off when connecting and dis-
connecting the charger cables to the 12-volt battery.
7-3. Do-it-yourself maintenance
I n f o r ma t i o n P r o v i d e d b y :
395
7