Toyota 2015 Prius C Owner's Manual page 189

Notes for the entry function
■
P. 141
If the hybrid system does not start
■
●
The immobilizer system may not have been deactivated. (P. 82)
Contact your Toyota dealer.
●
Check that the shift lever is securely set
in P. The hybrid system may not start if
the shift lever is not securely in the P
position. "SHIFT TO P POSITION TO
START" will be displayed on the multi-
information display.
Steering lock
■
After turning the "POWER" switch off and opening and closing the doors, the
steering wheel will be locked due to the steering lock function. Operating the
"POWER" switch again automatically cancels the steering lock.
When the steering lock cannot be released
■
"STEERING LOCK ACTIVE" will be dis-
played on the multi-information display.
Check that the shift lever is set in P.
Press the "POWER" switch while turning
the steering wheel left and right.
Steering lock motor overheating prevention
■
To prevent the steering lock motor from overheating, the motor may be sus-
pended if the hybrid system is turned on and off repeatedly in a short period
of time. In this case, refrain from operating the hybrid system. After about 10
seconds, the steering lock motor will resume functioning.
4-2. Driving procedures
I n f o r ma t i o n P r o v i d e d b y :
189
4