Toyota 2015 Prius C Owner's Manual page 373

Repair and replacement
■
It is recommended that genuine Toyota parts be used for repairs to ensure
performance of each system. If non-Toyota parts are used in replacement or if
a repair shop other than a Toyota dealer performs repairs, confirm the war-
ranty coverage.
Resetting the message indicating maintenance is required (U.S.A. only)
■
After the required maintenance is performed according to the maintenance
schedule, please reset the message.
To reset the message, follow the procedures described below:

Vehicles without a smart key system
1
Switch the display to the odometer (P. 97) and then turn the engine
switch off.
2
Turn the engine switch to the "ON" position. The multi-information display's
initial screen will be displayed for a few seconds. While the initial screen is
being displayed, press the "TRIP" steering switch (P. 95) 3 times, press-
ing and holding the switch on the third time.

Vehicles with a smart key system
1
Switch the display to the odometer (P. 97) and then turn the "POWER"
switch off.
2
Turn the "POWER" switch to ON mode. The multi-information display's ini-
tial screen will be displayed for a few seconds. While the initial screen is
being displayed, press the "TRIP" steering switch (P. 95) 3 times, press-
ing and holding the switch on the third time.
3 Continue to press and hold the button until the trip meter displays "000000".
Allow inspection and repairs to be performed by a Toyota dealer
■
●
Toyota technicians are well-trained specialists and are kept up to date with
the latest service information. They are well informed about the operations
of all systems on your vehicle.
●
Keep a copy of the repair order. It proves that the maintenance that has
been performed is under warranty coverage. If any problem should arise
while your vehicle is under warranty, your Toyota dealer will promptly take
care of it.
7-2. Maintenance
I n f o r ma t i o n P r o v i d e d b y :
373
7