First Time Use - Inserting Sim Card/Sd Card; Inserting/Charging Battery - easyteck T103C User Manual

1. Speaker
3. Call button/ OK button
5. Function key
7. MicroUSB connector/ charge
9. Speaker
Note: In standby mode, press the UP arrow key to access the main menu. Use the green
button to access features or options. If you want to delete any of the information you
entered, press the red button.
First time use
Inserting SIM card/SD card
Keep SIM cards out of the reach of children.
Consult your dealer about the SIM card and services related to its use.
2. Screen
4. On button / Exit button
6. Alphanumeric keys
8. SOS key
10. Torch
7
Note: Always make sure that your phone is turned off before inserting or removing the
SIM card, otherwise it may be damaged.
1. Remove the battery cover by lifting it up, insert the SIM card into the card slot with the
notch on the top left and the gold contacts facing down.
2. Open the dedicated housing and lay the SD card with its gold contacts facing down,
then close.
3. Replace the battery and close the lid.
Inserting/charging the battery
The cell phone should always use original batteries and accessories.
Open the cell phone from the rear, insert the battery by placing the gold connectors against
the corresponding ones inside the phone itself. Subsequently close the cover of the phone.
To recharge the battery
1. Connect the charger to the phone.
2. Plug the charger into a suitable wall outlet.
3. When your phone indicates that the battery is fully charged, unplug the charger from
the outlet.
Turning the phone on/off
1. To turn the phone on press and hold the on button for a few seconds.
2. In the event that the phone requires a lock code, enter it and press OK.
8