Threading The Upper Thread - Empisal Designer 800 Instruction Manual

Threading the upper thread

Caution:
Before threading, turn power switch
to "OFF".
Raise the needle bar to its highest
position. Follow exactly the numbered
threading sequence illustrated below.
If you skip a step or fail to properly
engage the thread in any of the
thread guides, the machine will not
sew properly. (1-5)
Continue to draw the thread down
and into the needle bar thread guide.
Insert the thread through the eye of
the needle from front to back. Leave
about 10 cm (4") of thread loose
behind the needle. (6)
a. Spool pin
b. Spool holder
12