System Menu - ADJ Starburst User Instruction

Starburst
ADJ Products, LLC - www.adj.com - Starburst Instruction Manual Page 8

System Menu

Starburst
System Menu: When making adjustments press ENTER to
confirm your setup then press and hold the MENU button
for at least 3 seconds. To exit without making any adjust-
ments press the MENU button. The display will lock after 30
seconds, press the MENU button for 3 seconds to unlock.
ADDR -
1. Press the either the MENU, UP, or DOWN buttons until "ADDR" is
displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the
UP or DOWN buttons to find your desired address. Press ENTER to
set your desired DMX address.
SLND -
master/slave configuration.
1. Press the MENU button until "SLND" is displayed, press ENTER.
Either "MAST", "SL 1", or "SL 2" will be displayed.
2. Press the UP or DOWN buttons until your desired setting is dis-
played, press ENTER to confim.
NOTE: In a Master/Slave configuration you can set one fixture to
Master and then set the next fixture to "SL 2", the fixtures will now
have contrast movement to each other.
SHND -
sound active mode active. With sound active mode active,
the fixture will move faster at times.
1. Press the MENU button until "SHND" is displayed, press ENTER.
SOUN -
1. Press the MENU button until "SOUN" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to activate sound active mode, or
DMX Address Setting.
This will let you set unit as a master or slave in a
Show mode. Show mode can run with or without
Sound Active mode.
ADJ Products, LLC - www.adj.com - Starburst Instruction Manual Page 9
System Menu