System Menu - ADJ MOD QA60 User Instructions

Hide thumbs Also See for MOD QA60:
Table of Contents

Advertisement

MOD QA60
MENU
DMX MODE ADDR:001~512
DMX MODE
CHAN:4/5/6/9/10
DMX MODE NO:BLACK
DMX MODE NO:HOLD
DMX MODE NO:AUTO
DMX MODE NO:MANUA
DMX MODE DELAY:0~4
SLAVE MODE
SOUND PRO:01~16
SOUND SENS:00~08
MANUAL RED:000~255
MANUAL GREN:000~255
MANUAL BLUE:000~255
MANUAL AMBE:000~255
MANUAL STROB:00~15
JUMP RUN SNAP:01~16
JUMP RUN SPEED:01~16
FADE RUN SNAP:01~16
FADE RUN SPEED:01~16
AUTO RUN FAD+SNAP
AUTO RUN SPEED:01~16
CLR MACS COLOR:00~64
CLR MACS STROB:00~15
OPTION BLGT:ON
OPTION BLGT:OFF
OPTION IR:ON
OPTION IR:OFF
OPTION SYSRESET
ADJ Products, LLC - www.adj.com - MOD QA60 User Manual Page 20
Sets the DMX starting address
Set the unit DMX channels
When DMX signal is lost or interrupted,the unit will default to BLACKOUT option.It will
switch all LED's off
When DMX signal is lost or interrupted,the unit will default to HOLD option.It will hold the
last state before signal was lost.
When DMX signal is lost or interrupted,the unit will default to AUTO option.It will run the
internal programs.
When DMX signal is lost or interrupted,,the unit will default to the manual color setting
Select the unit delay mode
Set the unit into slave mode
Select the 16 sound active modes
Adjust the sound active sensitivity level,00 is sound active off,01 is the lowest level,8 is
highest level.
Adjust the intensity of the red color
Adjust the intensity of the green color
Adjust the intensity of the blue color
Adjust the intensity of the amber color
Adjust the flash speed,00 is flash off,01 is slowest,15 is fastest
Select the 16 color change modes
Adjust the speed of the color change mode
Select the 16 color dreaming modes
Adjust the speed of the color dreaming mode
Select the auto run mode
Adjust the speed of the auto run mode
Select the 64 static colors
Adjust the strobe speed,00 is strobe off,01 is slowest,15 is fastest
LCD backlight always on
LCD backlight will be off after 20 seconds
IR remote function on
IR remote function off
Initialize the unit at the extra factory setting
DESCRIPTION

System Menu

Advertisement

Table of Contents
loading

Table of Contents