Tp4000/Tp4000 Rf Programming - Danfoss TP4000 Range Installation Manual

Electronic programmable room thermostat

Hide thumbs Also See for TP4000 Range:

Available languages

Step 3

RX1 - Press and hold buttons PROG and CH1

for 3 seconds until green light ﬂ ashes once.

Step 4

RX2 (if applicable)

Stat 1 - perform steps 1-3 and 5.

Stat 2 - perform steps 1-2 and then press PROG and CH2 on RX2.

RX3 (if applicable)

Stat 1 - perform steps 1-3 and 5.

Stat 2 - perform steps 1-2 and then press PROG and CH2 on RX3

then step 5.

Stat 3 - perform steps 1-2 and then press PROG and CH3 on RX3.

Step 5

TP4000-RF - Press V or Λ to select temperature - the unit will revert

back to operating mode.

4.0 TP4000/TP4000 RF Programming

For details of this function, please refer to the user instructions.

Danfoss Heating

Table of Contents

Show Quick Links

Do you have a question about the TP4000 Range and is the answer not in the manual?

Tp4000 rf