Burners - Miele GAS COMBISET CS 1012 Operating And Installation Instructions

Burners

The burner can be dismantled and
cleaned when cool.
^ Remove the burner parts and wash
them in a solution of warm water and
liquid dish soap. Dry them
thoroughly. Make sure that the flame
holes are clean and completely dry.
^ Wipe the burner base clean with a
damp cloth and then dry.
^ Gently wipe the ignitor and ignition
safety control with a slightly damp
cloth, and then wipe dry.
Make sure that no liquid gets into
the appliance.
Cleaning and care
Reassembling the burner
^ Place the burner head
burner base
thermocouple
align through the holes in the burner
head. The burner head must fit into
place properly.
^ Place the burner cap
the burner head
Once the burner cap is in the right
position, it will not move.
Be careful not to mix up the parts.
onto the
, making sure that the
and the ignitor
evenly onto
.
17