Miele GAS COMBISET CS 1012 Operating And Installation Instructions page 20

Frequently asked questions
The igniter does not spark.
Possible fault
The circuit breaker has tripped.
Food has deposited itself between the
ignitor and the burner cap.
Food has deposited on the ignition
safety control.
For safety reasons, after a spill on the combiset you may need to wait approx. 5
minutes before you are able to reignite the burner. Wait 5 minutes and ignite the
burner as usual.
20
Solution
Re-set the circuit breaker. Contact an
electrician for assistance if in doubt.
See "Cleaning and care".
See "Cleaning and care".