Outgoing Messages; Select And Play Outgoing Message - BT Freelance XD 5500 User Manual

8011 Freelance XD5500 UG [1]
32 Using the answering machine
Personalise your OGM
To record your own outgoing message,
see 'Record your own outgoing
message', see page 33.
The answering machine is pre-set to
Answer and Record mode.
Answer and Record
Callers hear the announcement and are
able to leave a message for you. The
pre-recorded message is, "Hello, your
call cannot be taken at the moment, so
please leave your message after the
tone."
Answer only
Callers hear an announcement but
cannot leave a message. The pre-
recorded message is, "Hello, your call
cannot be taken at the moment, and
you cannot leave a message, so please
call later."
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
22/1/07 11:07
BT Freelance XD5500 – Issue 2 – Edition 1 – 22.01.07 – 8011
At the end of playback:
You will hear, "End of messages. To delete all messages, press
delete". To delete all messages, press
messages deleted".

Outgoing messages

The outgoing message (OGM) is the greeting a caller hears
when the answering machine picks up their call.
Your BT Freelance XD 5500 gives you a choice of two
pre-recorded outgoing messages, one for Answer and Record
and one for Answer Only.

Select and play outgoing message

At the handset:
1. Press , scroll
2. Scroll
3. Press or
and press
Page 32
to
TAM SETTINGS
to and press
ANS MODE
to select either
ANS AND REC
to confirm.
, you will hear, "All
and press .
.
or
ANS ONLY