HumanTechnik Signolux User Manual page 6

Installing the microphone cable
The »Acoustic universal transmitter«
is able to react to acoustic signals
(e.g. the ringing of a telephone or
doorbell) due to a connected micro-
phone. It then transmitts a radio signal
to all assigned »signolux«-receivers
within reach.
Use the adhesive ring to stick the mi-
crophone housing onto the acoustic
output grill of your doorbell / telepho-
ne or intercom system.
To do this, pull off the backing foil from
the adhesive ring on the microphone.
Plug the microphone cable into socket
#1 on the underside of the »Acoustic
universal transmitter« .
To ensure an ideal functioning of the
transmitter, please set the sensitivi-
ty control #1 in such a way that the
transmitter securely reacts to the ac-
cording acoustic signal.
Method:
- Set the sensitivity control #1 to the
least sensitive (extreme left, turn
counter-clockwise).
- Trigger the sound source and gra-
dually adjust the sensitivity control
(turn clockwise) until the transmitter
reacts to the sound.
Please note: A sensitivity setting, ad-
justed too high, may result in false
alarms.
Register the transmitter with the re-
ceivers, use a symbol matching the
event (telephone symbol for the tele-
phone etc).
Setup as a baby alarm
The »Acoustic universal transmitter«
can register a crying child and then
transmit an according signal to all
assigned »signolux«-receivers within
reach.
To do so, it is neccessary to aquire
the baby-microphone cable (Item no.
A-4901-0, available as accessory).
The included microphone cable can-
not be used for this purpose!
Mount the baby microphone in the
proximity of the child's bed. A self-
adhesive velcro band is supplied for
this purpose.
For reasons of health and safety:
Make absolutely sure that the child
cannot reach the microphone and /
or the attached cable!
Plug the baby microphone cable into
socket #2 of the underside of the
»Acoustic universal transmitter«.
For a reliable transmission, the sensi-
tivity control should be set in such a
way that the transmitter reacts secu-
rely to the child's crying.
Method:
- Set the sensitivity control #2 to the
most sensitive (extreme right, turn
clockwise).
- Should the transmitter react to neg-
legible noises (e.g. snoring, sighing,
sniffles), please decrease the sen-
sitivity in small steps (turn counter-
clockwise) until the transmitter stops
to react to the irrelevant sounds.
English 13