1. Specifications Connectors: 6100846 - (6) ST, (1) 3.5 mm power input, or 6100845 - (3) duplex SC, (1) 3.5 mm power input Data Rates: Transparent to optical signal rates and formats Switching Speed: 5 msec typical, 10 msec maximum Sensitivity: 750 to 1450 nanometers Optical Loss: less than 3.0 dB typical per FOTP-171 method B1 Compatibility: 62.5/125 µm multimode fiber...
Note that the Fiber Optic A/B Switch with Loopback supports separate transmit and receive paths, so you must be consistent when connecting the fiber pairs to the switch. The fiber optic connectors on the ST version of the switch are marked “1” and “2” to help insure that the proper connections are made to each port. On the SC version of the switch, the left connector position of the SC duplex connector for the C port is switched to either the left connector position of either the A or B port duplex connector, and the right connector position of the SC duplex connector for the C port is switched to either the right connector position of either the A or B port duplex connector.
Page 4
MARKET CENTRAL, INC. WARRANTY AND LIMITATION OF LIABILITY Market Central, Inc. (“Market Central”) warrants that the products manufactured and sold by it or by one of its authorized resellers will, when sold, be free of defects in workmanship or material under normal service and use.
Need help?
Do you have a question about the Data DeadBolt 6100845 and is the answer not in the manual?
Questions and answers