Table of Contents
Advertisement
3. INITIAL menu
INITIAL
ASPECT
MENU POSITION
PROGRESSIVE
MODE
COLOR SYSTEM
SET UP LEVEL
SCART INPUT
LANGUAGE
RESET ALL
ITEM
ASPECT
MENU POSITION
PROGRESSIVE
MODE
COLOR SYSTEM
SET UP LEVEL
SCART INPUT
LANGUAGE
RESET ALL
• DEFAULT depends on the two signal types below:
1. Video signals (TV50, TV60, 480i/p, 576i/p, 720p50/60, 1080i50/60)
2. Computer signals (VGA, XGA, etc.)
See page 40 for a complete listing for the signal specifications.
Downloaded from
www.Manualslib.com
TV60
DEFAULT
UPPER LEFT
AUTO
AUTO
DEFAULT
OFF
ENGLISH
EXECUTE
SETTING
FUNCTION
DEFAULT
The appropriate aspect ratio is automatically selected depending on the input signal. Select
DEFAULT for normal use.
NORMAL
Select to project images with an aspect ratio of 4:3.
SQUEEZE
Select to project images with an aspect ratio of 16:9.
SUBTITLE ZOOM
Select to project subtitled letter box format software.
ZOOM
Select to enlarge and project images of CinemaScope size or Vista size.
SMART ZOOM
Select to stretch the left and right edges of a 4:3 image without altering the image center to
project a 16:9 image that fills the screen.
THROUGH
Select to project images in their original size as input.
4 positions
Use to change the position of the menu being displayed on the screen.
AUTO
Detects the video and film contents and convert into opitmized progressive frames
automatically.
Force to convert using motion-adaptive I/P conversion for video contents only.
VIDEO
8 options
When AUTO is selected, the appropriate video format is automatically selected depending on
the input signal. If the image is not displayed correctly, select the desired video format manually.
DEFAULT, 0%,
Select the black level of the projected image. SET UP LEVEL is automatically set to 7.5%
3.75%, 7.5%
when you select any language except
DEFAULT for normal use.
ON, OFF
Select ON when connecting the projector to the equipment having a SCART terminal that can
output RGB signal. SCART terminal is used mainly in Europe. Select OFF for normal use.
10 languages
Use to select the language used in the menu.
Use to reset the settings of the menu (excluding LANGUAGE) to its factory presets. It may
EXECUTE
take few seconds that the projector is reset to its factory presets.
manuals search engine
http://www.pureglare.com.au
(Japanese) in the LANGUAGE menu. Select
25
Advertisement
Table of Contents
