Section 3 - Configuration
2.4 GHz
Wireless Band:
Mode:
AP Repeater is selected from the pull-down menu.
Network Name
Service Set Identifier (SSID) is the name designated
(SSID):
for a specific wireless local area network (WLAN).
The SSID's factory default setting is dlink. The SSID
can be easily changed to connect to an existing
wireless network.
This option is unavailable in AP Repeater mode.
SSID Visibility:
Enabling this feature automatically selects the channel
Auto Channel
that will provide the best wireless performance. This
Selection:
feature is not supported in AP Repeater mode.
Channel:
The channel used will be displayed, and matches
the AP that the DAP-1353 is connected to when set
to AP Repeater mode.
Channel Width:
Use the pull-down menu to choose 20 MHz or Auto
20/40 MHz.
Site Survey:
Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect
with.
Authentication:
Use the pull-down menu to choose Open System or WPA-Personal.
Select Open System to communicate the key across the network.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
D-Link DAP-1353 User Manual
AP Repeater mode
22