Control Systems - Thrush Aircraft S2RHG-T65 TURBO THRUSH Maintenance Manual

THRUSH AIRCRAFT, INC – MODEL S2RHG-T65 TURBO THRUSH

CONTROL SYSTEMS

Check all turnbuckles for corrosion and for proper
1.
lock wiring.
Inspect all cables and end fittings for wear. Check
2.
for correct tension.
Check all push rods for loose bearings, endplay,
3.
straightness and paint condition.
Check idlers and bell cranks for binding or for
4.
slack.
Inspect the rudder pedals and the support
5.
brackets for general condition.
Inspect the attachment of the control stick to the
6.
main torque tube for slack and bearing wear.
Check control stick to main torque tube bolt for
7.
proper torque (65 to 70 in. lbs.)
Check the aileron control stops for tightness and
8.
for condition of fittings.
Inspect all push-pull tubes rod-end jam nuts for
security. Inspect all witness/inspection holes with
9.
a piece of .032" safety wire to insure that all rod-
ends are screwed far enough onto the push-pull
tubes.
Inspect the push rods for clearance to the
10.
structure.
Inspect the trim systems for correct operation and
11.
for general condition.
Remove control stick from main the torque tube
12.
bolt, inspect and replace bolt as required.
2-26
AIRCRAFT MAINTENANCE MANUAL
X
X
X
X
X
X
X
X
X
X
X
X
500
Hours
Effective 05/25/05