Inspection Check List - Thrush Aircraft S2RHG-T65 TURBO THRUSH Maintenance Manual

Table of Contents

THRUSH AIRCRAFT, INC – MODEL S2RHG-T65 TURBO THRUSH

Movable parts are to be checked for lubrication, servicing, security of attachment,

binding, excessive wear, Safety, proper operation, proper adjustment, correct

travel, cracked fittings, security of hinges, defective bearings, cleanliness,

corrosion, deformation, sealing, and tension.

Fluid lines and hoses are to be checked for leaks, cracks, dents, kinks, chafing,

proper radius, security, corrosion, deterioration, obstructions, and foreign matter.

Metal parts are to be checked for security of attachment, cracks, and metal

distortion, broken spot welds, corrosion, condition of paint, and any other

apparent damage.

Wiring is to be checked for security, chafing, burning, defective insulation, and

loose or broken terminals, heat deterioration, and corroded terminals.

Bolts in critical areas are to be checked for correct torque, or when visual

inspection indicates the need for a torque check. See (Fig 2-7) Torque Chart.

Filters, screens, and fluids are to be checked for cleanliness, contamination

and/or replacement at specified intervals.

This Manual contains information on aircraft systems and operating procedures required

for safe and effective maintenance.

judgment.

Clean the aircraft prior to performing any inspections on the airframe or engine. Before

removal of detachable skins, fairings, and cowlings wash all exterior surfaces of the

aircraft with plain water and any commercial soap or detergent. Soap and detergent are

organic chemicals and it is important that all traces be removed by flushing with plain

water.

Certain

effectively by detergent solutions. Special

cleaning agents are available for that purpose. It

is suggested that the chemical suppliers be

contacted for cleaning agents that are suitable

for those special needs.

Inspection intervals are greatly influenced by particular operational priorities, operating

conditions, environment, and routine inspection results.

Perform the tasks shown in the following Inspection Chart at the prescribed intervals, or

more often if necessary.

Effective: 05/25/05

AIRCRAFT MAINTENANCE MANUAL