Engine Externals - Thrush Aircraft S2RHG-T65 TURBO THRUSH Maintenance Manual

THRUSH AIRCRAFT, INC – MODEL S2RHG-T65 TURBO THRUSH
Check ring rod-end jam nuts.
11.
Re-install spinner.
12.
alignment of low pitch stop collar. (.010 max.
runout)
Check carbon block side clearance.
New Block: .001 "-.002" clearance
13.
Used Block: .010"-max allowed
Check beta control valve clevis slot end for
14.
alignment with face of cap nut.
Check fuel governor reset arm for hitting stop.
15.
Check prop governor control levers for hitting stop
16.
in low and high pitch.
Check reversing cable housing jam nuts and pins
17.
for safety and condition of housing.
Inspect overspeed governor.
18.

ENGINE EXTERNALS

REFER TO THE ENGINES' APPROPRIATE PRATT & WHITNEY
MAINTENANCE MANUAL FOR PERTINENT DETAILS ON
ENGINE INSPECTION
Check the tubing, wiring, control linkages, and
1.
hose assemblies for security of all the accessible
connections, clamps, and brackets.
Check tubing and hose assemblies for evidence of
2.
wear, chafing, cracks, and corrosion.
Check the tubing, wiring, control linkages, and
3.
hose assemblies for evidence of fuel and oil
leakage.
Lubricate interconnecting rod ball ends, where
4.
applicable.
5. Check the air inlet screen area for cleanliness.
Effective: 05/25/05
AIRCRAFT MAINTENANCE MANUAL
PROPELLER
(Continued)
Rotate prop and check
X
X
X
X
X
X
X
X
X
X
X
X
X
2-17