2. Ataching the wings to the fuselage
The wings are already
allinged and the mounting is
already installed in the
factory.
Slide the carbon wing rods in
the funselage sleves and
then slide the wing on to
doublecheck propper fit of
the allingmet between
Fuselage and wing.
If necessary, sand on the
root rib sligtly to achief
perfect fit.
The wing rods are slighly
different in length, the longer
ones go in the front, the
shorter ones in the back.
Each wing gets secured to
the fuselage with two plastic
nuts as shown.