Speed Dialing - Sena Bluetooth Mic & Intercom User Manual

8.2 Speed Dialing

You can quickly make a phone call by using the
voice speed dial menu.
1. To enter into the voice speed dial menu, press
and hold the (+) Button for 3 seconds and you
will hear a mid-toned single beep and a voice
prompt saying "Speed dial".
2. Tap the (+) Button or the (-) Button to navigate
between the menus. You will hear voice
prompts for each menu items.
3. Tap the Center Button to select a voice menu
among the followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
(4) Speed dial 3
(5) Cancel
4. After selecting the last number redial menu,
you will hear a voice prompt saying "Last
number redial". Then, to redial the last phone
call number, tap the Center Button.
5. To call one of the speed dials, tap the (+)
Button or the (-) Button to navigate between
the menus until you hear a voice prompt
saying "Speed dial (#)". Then, tap the Center
Button.
6. If you want to exit the speed dial immediately,
tap the (+) Button or the (-) Button until you
hear a voice prompt saying "Cancel", and tap
the Center Button. If any button is not pressed
within 15 seconds, the Bluetooth Mic will exit
the voice speed dial menu and goes back to
stand-by mode.
7. To cancel the voice dialing or redialing last
number command, tap the Center Button
while it is in progress.
31