Enabling/Disabling Voice Prompts - Sena Bluetooth Mic & Intercom User Manual

3. Tap the (+) Button or the (-) Button to select
one of three speed dial numbers and you will
hear a voice prompt saying "Speed dial (#)".
4. Call a phone number you want to assign
and you will hear a voice prompt saying
"Save speed dial (#)". The phone number is
automatically assigned to the selected speed
dial number. Then the phone call will hang up
before being connected.
5. To exit the menu, tap the (+) Button or the
(-) Button until you hear a voice prompt
saying "Cancel", and tap the Center Button
to confirm. You will then hear a voice prompt
saying "Cancel". If any button is not pressed
within 1 minute, the Bluetooth Mic will exit
the configuration menu and go back to stand-
by mode.
1. You can assign up to 3 phone numbers for
speed dial.
2. You can assign phone numbers for speed
dialing by using the Sena Device Manager
software. For more information, visit the Sena
Bluetooth web site at www.sena.com.
4.6 Enabling/Disabling Voice
Prompts
Voice Prompt
Factory Default
Enable / Disable
You can disable voice prompts by configuration
setting, but the following voice prompts are
always on.
- Voice prompts for configuration menu
- Voice prompts for battery level Indicator
"Voice prompt"
N/A
Tap the Center Button
19