Vertex Standard VX-P920 Series Operating Manual page 29

C 1 C 5
all to all
Press the assigned programmable key to send a
2-tone/5-tone sequential tone group which is pre-
defined.
C u /D
oWn ( 16-
oDe p
Key
Press the assigned programmable key to select a
2-tone/5-tone encode code from the pre-defined en-
code list.
C s
et ( 16-
oDe
& 4-
Key
Press the assigned programmable key to change the
encode digits for 5-tone operation. To change a spe-
cific digit, select the desired digit using the [ A ] key,
then change the number using the [ B ] / [ C ] keys, and
store the number using the [ D ] key.
s D
ial ( 16-
peeD V
Key ersion only
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the assigned programmable
key, then press the front panel's numeric key corre-
sponding to the Auto-Dial memory number list pro-
vided by your Dealer or Network Administrator. The
DTMF tones sent during the dialing sequence will be
heard in the speaker.
VX-P920 S O
erieS Perating
a
DVanCeD
)
& 4- V
Key ersion only
)
V
Key ersion only
)
M
anual
o
peration
e
mergenCy
The VX-P920 series include an "Emergency" feature
which may be useful for alerting another party moni-
toring on the same frequency as your transceiver's
channel.
Press the assigned programmable key to initiate an
emergency call. For further details contact your Dealer.
h
ome ( 16-
& 4-
Key Key
Press the assigned programmable key to recall the
pre-defined Home group/channel. When you recall the
Home group/channel, the "
on the LCD.
s t
one ( 16-
eleCtaBle
Press the assigned programmable key to select a sub-
audible tone (CTCSS/DCS) from the pre-defined tone
table. You can operate using the indicated sub-audible
tone in the Selectable Tone mode.
D Ch#1 - #4
ireCt
Press the assigned programmable key to recall the
Dealer pre-programmed channel directly.
)
V
ersion only
" notation will appear
& 4- V
Key Key ersion only
( 16-
& 4- V
Key Key ersion only
)
)
27