Operating Precautions; Extending The Slide-Out Room - Tiffin Motorhomes Allegro Bus 2016 Owner's Manual

OPERATING PRECAUTIONS

Before the slide-out-room mechanism is to be used, make sure the motorhome is parked, the leveling
process has been properly completed. Verify that no obstacles (e.g., branches, trees, telephone poles,
power/water hookups, trash bins, etc.) are within a five-foot space envelope of that slide-out room to
keep from damaging the slide-out room when it is finally deployed.
Before attempting to extend the slide-out room, check outside and make
sure that there is at least a five-foot clearance around the area where the
slide-out room will be extended and be sure the driver's and passenger's
seats are moved to the forward position.

EXTENDING THE SLIDE-OUT ROOM

1. Any loose materials or possible obstructions,
such as rugs or furniture should be removed from
the immediate, slide-out room area.
Make sure that the motorhome has been leveled,
that the battery is fully charged and connected to
the electrical system, and that the ignition switch
is "on" and the engine is running before attempt-
ing to use the slide-out features.
2. Verify that there are no obstructions out-
side which may interfere with the operation of the
slide-out room.
3. Prior to moving the slide-out room in either
direction, make sure that the driver's and passenger's chairs are moved forward into the driving area as
far as possible and locked into position.
4. Make sure the ignition switch is on the "on" position and the parking brake is engaged.
5. Push the "Extend" portion of switch and allow the slide-out room to go to its fully extended po-
sition. When fully extended, release the switch.
SLIDE-OUT FEATURES
NOT IC E
61
Figure 9-2:
Typical slide-out fully extended