Tiffin Motorhomes Allegro Bus 2016 Owner's Manual page 102

level the vehicle side to side first, if needed, before front to rear.
3. When leveling is completed, turn the ignition switch to the "OFF" position.
To retract the jack in manual leveling mode:
Simply turn igition to the "On" position and push the "Store" button.
To manually override the jack system in event of power failure:
1. Locate the manual valve release on each solenoid valve. The solenoid valves are located on the power
unit/valve assembly in an outside compartment.
2. Allow clearance for the vehicle to lower.
IMPORTANT: Only open the valves enough to retract the jacks.
3. Push the manual release valves to a downward position.
4. Make sure that all four jacks are now retracted.
5. Close the valves by extending the manual valve releases to an extended position.
For a more complete review of the leveling system, find the operation guide inside your Owner's Informa-
tion Packet.
OPTIONAL AIR LEVELING SYSTEM
The Allegro Bus may
be equipped with an
optional air leveling
system.
Before engaging the air
leveling system, ensure
that the following are
in place: the vehicle's
engine is running and
the air system is at full
pressure; the parking
brake is engaged; and
the front wheels are
straightened.
If the POWER indica-
tor is flashing, the igni-
tion is off, and must be
turned on. Also verify
DRIVING
Figure 15-8: Optional air leveling system control panel
95