Table of Contents
Advertisement
TIFFIN MOTORHOMES
Operating Precautions
Before attempting any extension of the slide-out room, check outside
and make sure that there is at least a five-foot clearance around the area
Before the slide-out-room mechanism is to be used, make sure that the motor home is parked, the leveling
process has been properly completed. Verify that no obstacles (e.g., branches, trees, telephone poles,
power/water hookups, trash bins, and the like) are within a five-foot space envelope of that slide-out room to
preclude damaging the slide-out room when it is finally deployed.
Extending the Slide-Out Room
1.
All windows in any slide-out room (Figure 8-2) must be closed
and secured before that slide-out room is to be extended or
retracted. Also any loose materials or possible obstructions
should be removed from the immediate slide-out room area.
Make sure the motor home has been leveled. Make sure
That the battery is fully charged and connected to the
electrical system.
2.
Verify that there are no obstructions outside which may
interfere with the operation of the slide-out room.
3.
Prior to moving the front slide-out room in either direction,
make sure that the driver's chair is moved forward into the
driving area as far as possible and is locked into position.
4.
Make sure that the ignition switch is in the "on" position and the park brake is set to operate prior to
using the slide-out function.
5.
Push the "out" portion of the rocker switch; allow the slide-out room to go to its fully extended
position—at this point, release the rocker switch (this locks the room into position).
Retracting the Slide-Out Room
1.
Before attempting to move the motor home, the slide-out room must be fully retracted.
2.
Verify that the battery is fully charged and connected to the electrical system.
3.
With the ignition switch in the "on" position and the engine running with the park brake set, push the
"in" portion of the rocker switch; allow the slide-out room to go to its fully-retracted position—at this
point, release the rocker switch (this locks the room into position).
–ALLEGRO®
!
Warning
where the slide-out room will be extended.
!!!
Chapter 8
!
!
SLIDE-OUT FEATURES
Figure 8-2. Typical Slide-Out
8-3
Advertisement
Table of Contents
