Electrical Cautions; Circuit Breaker Boxes - Tiffin Motorhomes Allegro Bus 2016 Owner's Manual

• Careless handling of electrical components can be fatal. Do not touch or
use electrical components or appliances while feet are bare, while hands
are wet, or while standing in water or on wet ground.
• Do not attach an extension cord to the utility power cord.
• Avoid overloading circuits and replace fuses or circuit breakers with
those of the same size and amps only. DO NOT use a higher rated fuse or
breaker.
• Do not plug the utility power cord into an outlet that is not grounded.
• Do not adapt a plug to connect to a receptacle that it is not designed for.
• Be sure that all electrical appliances used inside the motorhome contain
three-prong plugs for proper grounding.
• Use caution when handling or working near electrical storage batteries.
• Always remove jewelry and wear protective clothing and eyewear when
working on an electrical matter.

CIRCUIT BREAKER BOXES

For the Allegro Bus, the 120 VAC and 12 VDC breaker boxes (Figure 8-1) vary depending on your
specific floorplan, however, they are located inside the motorhome.
The circuit breakers and associated fuses are installed to protect the electrical system of the Allegro
Bus from any overloads. Do not attempt to change the electrical circuitry or to add appliances yourself.
Fusing is provided for the following 12 VDC circuits: all interior decorative and overhead lighting, wa-
ter heater, TV switching box, slide-out lights, power roof vents, monitor panel and the passenger side
console switch panel.
Additional 12 VDC fuse panels are located in the front storage compartment on the driver's side; these
fuse panels provide protection for the following circuits: mirrors, fog lights, hydraulic jacks, camera,
wipers, docking lights, dashboard panels, spot light, power seats, radio, step cover, satellite receiver,
30-ampere ignition breaker, 50-ampere ignition breaker, and dashboard air circuit breaker.
ELECTRICAL FEATURES
ELEC T RICA L CAU T ION S
46