Specifications - Sharp VC-A310X/NZ Service Manual

1. SPECIFICATIONS

Video recording system: Rotary, slant azimuth two heads helical scan system
Video signal: PAL colour or monochrome (CCiR system B/G) signals
Recording/playing time: 240 min max. with SHARP E-240 tape (PAL: SP mode)
Tape width: 12.7mm
Tape speed: 23.39 mm/s (PAL: SP mode)
Receiving channel: VHF Channel NZ1 - NZ11, UHF Channel E21 - E69 (for New Zealand)
RF converter output signal: UHF Channel E21 - E69 Adjustable preset to E36 (for New Zealand)
Power requirement: AC230V ± 15% , 50Hz (for New Zealand)
Power consumption: Approx. 14W
Operating temperature: 5°C to 40°C
Storage temperature: –20°C to 55°C
Dimensions: 360 mm (W) x 229 mm (D) x 92 mm (H) (VC-A310X/NZ,H725X)
S/N ratio: 45dB min (PAL-SP)
Horizontal resolution: 250 lines min (PAL-SP)
S/N ratio: 43dB min (SP mode) (VC-A310X/NZ, H725X)
Frequency responce: 80 Hz ~ 10 kHz (SP mode)
Hi-Fi Dynamic Range: 85dB min
Hi-Fi Wow and Flutter: 0.005% Max.
Hi-Fi Frequency responce: 20Hz ~ 20kHz
Hi-Fi Distortion: 0.5% Max.
Hi-Fi Crosstalk: 55 dB min
Accessories included: 75 ohm coaxial cable
Format: VHS PAL/NTSC standard
480 min max. with SHARP E-240 tape (PAL: LP mode)
720 min max. with SHARP E-240 tape (PAL: EP mode)
160 min max. with SHARP T-160 tape (NTSC: SP mode)
480 min max. with SHARP T-160 tape (NTSC: EP mode)
11.70 mm/s (PAL: LP mode)
7.8 mm/s (PAL: EP mode)
33.35 mm/s (NTSC: SP mode)
16.67 mm/s (NTSC: LP mode)
11.12mm/s (NTSC: EP mode)
Antenna: 75 ohm unbalanced
VHF Channel AU0 - AU12, UHF Channel AU28 - AU69 (for Australia)
UHF Channel AU28 - AU69 Adjustable preset to AU37 (for Australia)
AC240V ± 10% , 50Hz (for Australia)
Weight: Approx. 2.4 kg (VC-A310X/NZ,H725X)
Approx. 2.7 kg (VC-H730X/NZ)
430 mm (W) x 227 mm (D) x 92 mm (H) (VC-H730X/NZ)
VIDEO
Input: 1.0 Vp-p, 75 ohm
Output: 1.0 Vp-p, 75 ohm
AUDIO 0 dBs = 0.775 Vrms
Input: Line 1:-8 dBs/47k ohm
Input: Line 2:-8 dBs/47k ohm (VC-H725X, H730X/NZ)
Output: Line -8 dBs/1k ohm
45dB min (SP mode) (VC-H730X/NZ)
80 Hz ~ 5 kHz (LP mode)
80 Hz ~ 3 kHz (EP mode)
Operation manual
Infrared remote control
Battery
As part of our policy of continuous improvement, we reserve the
right to alter design and specifications without notice.
Note: The antenna must correspond to the new standard DIN 45325
(IEC 169 - 2) for combined UHF/VHF antenna with 75 ohm connector.
3
VC-A310X/NZ
VC-H725X
VC-H730X/NZ