Ikon IK82 User Manual page 8

Drill the D, E points with a Ø 6mm drill bit to screw
the flue installation plate referring to the min. and
max. heights of the appliance. Figure 5
Install 6 mm dowels to the holes you have drilled.
Tightening the suspension screws:
Tighten 5.5x60 suspension screws to Ø10 mm
dowels (A, B) you have tapped on the wall. The
distance between screw head and the wall shall be
5 mm. Figure 6
Tighten the flue installation plate to the Ø 6 dowels
you have tapped to the wall using the 3.9x22 screw
supplied with your hood. Figure 7
Figure 4
E
D
Figure 5
E
D
B
A
C
Figure 6
Suspending the Hood to the Wall:
Hold the hood from its body and suspend it to the
wall on A and B points using the (L) plates you have
fixed on the hood cabinet before. Figure 8
When the suspension procedure is completed,
tighten the suspension screws installed to the wall in
Fig. 6 with a screwdriver to prevent moving of the
appliance. Figure 9
After you have fixed your hood completely, secure
the body with a screw from the hole (C) inside the
body to prevent it from moving.Figure 10
10
E
D
D E
Figure 7
Figure 8
Figure 9
Figure 10