Figure - Ikon IK82 User Manual

Lamba Simgesi: Lamp Icon: The lamp icon
on the digital screen shall be activated when you
touch this icon. To activate dimmer feature, user shall
hold his/her finger pressed on the lamp icon as in the
other products.
WASH FILTER: After 60 hours of operation,
this icon shall be illuminated on the screen. User may
remove this icon from the screen by pressing the on/
off button after cleaning the filter.
Speed: This icon shall be activated when the
appliance is operated. Also, dimmer and timer values
shall be shown here.
This explanation applies to models with
touchscreen slider switch
Control area Variant 5
1 2
1- Press this button to turn on the appliance.
2- Press this button to operate the appliance in 3rd
speed.
3- Press this button to operate the appliance in 3rd
speed.
4- Press this button to operate the appliance in 3rd
speed.
5- Press this button to turn on lamps of the
appliance.
This explanation applies to models with push
button switch.
Cleaning Periods for the Metal Filters:
Filters shall be cleaned every 2 to 3 weeks (as per
frequency of operation) or when the "C" signal is
shown on the display. After cleaning and installing
the filters, press (
is turned off) to remove signal "C" for more than 3
seconds. "E" shall be indicated on the display and
normal operation shall be resumed. If you want to
resume operation without removing the "C" signal,
active speed shall be displayed for 1 second when
you press the (
be displayed again and the motor shall resume
operation.
" C " sign shall be displayed after 60 hours
operation of the appliance.
This explanation applies to models with djt
switch.
3 4
) button (when the appliance
) button and " C " signal shall
Control area Variant 6
3 spd Push Pull
Switch Positions
Push the button down and bring it to the desired
position to select the desired speed of the appliance.
Replacement of Halogen Lamps
Disconnect the hood from mains
To replace halogen bulbs, press down from the
rear side of the lamp socket and pull the lamp
downwards, then rotate it a little clockwise and
remove it downwards. Figure 15
5
Replacement of Glow Bulbs
Disconnect the hood from mains. Remove the
aluminum cartridge filter.
Remove the faulty bulb and replace with a new one
with the same rating. (Lamps may burn your hand
when they are hot, wait until they are cooled off.)
In order to replace the lamp, remove the glass cover
on the lamp with an object that would not scratch the
surface of the appliance as shown in Figure 16.
Pull down and remove the faulty lamp and replace
with a new one.
14
v
ıv
5 spd Push Pull
Switch Positions

Figure 15