Foscam C1 User Manual page 45

The camera's software will be configured for port forwarding. There may be issues with your routers
security settings, and sometimes may error. We recommend you configure port forwarding manually on
your router.
4.4.6 Port
This camera supports HTTP Port. HTTP Port is used to access the camera remotely. If you want to
access the camera and view the video, the HTTP Port must both be configured correctly.
HTTP port: By default, the HTTP is set to 88. Also, they can be assigned with another port number
between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21.
ONVIF port:
number between 1 and 65535(except 0 and 65534). But make sure they can not be conflict with other
existing ports.
HTTPS port: The default port is 443. You can use the url to access the camera: https:// IP + HTTPS
port.
RTSP port: The default port is 554. Only some IP Cameras have RTSP port.
Another way to change the HTTP port NO.
Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on
Foscam Digital Technologies
Telephone: 1-800-930-0949
By default, the ONVIF port is set to 888. Also, they can be assigned with another port
www .foscam. us
www .foscam. us
43