Foscam C1 User Manual page 11

Notes:
 We recommend you to choose to manually set the IP when you know some knowledge of the
network.
 It needs about 1 minute to connect the camera to your router.
7. After completing the setup wizard, you should press the Soft AP button for 3-5 seconds to cancel the
Soft AP connection mode, this is located on the back of your camera. The Network light begins to slowly
flash(once per second), it indicates that the wireless connection is successful.
8. Please make sure that the wireless device connect your laptop to the router which your camera has
Foscam Digital Technologies
Telephone: 1-800-930-0949
www .foscam. us
www .foscam. us
9