Using the CD-ROMs
Supplied CD-ROM “Wireless Studio”
The supplied CD-ROM “Wireless Studio” includes the
following files.
Wireless Studio: Software that allows the status of the
DWR-R01D, RMU-01, and Sony digital wireless
transmitters to be monitored from the PC, in addition to
allowing remote control of settings for the DWR-R01D
and transmitters.
Wireless Studio User’s Guide: This is a PDF file that
describes function and usage of the Wireless Studio. The
file can be viewed on the PC screen.
To use the Wireless Studio, the software must be installed
in the PC.
For details, see “Installing the software” on page 10.
Adobe Reader Version 6.0 or higher must be installed on
your computer in order to read the User’s Guide contained
on the CD-ROM.
For details, see “Using the CD-ROM manual” on
page 11.
Operating conditions of the software
For details on operating conditions of the software, refer to
the Wireless Studio User’s Guide stored on the supplied
CD-ROM “Wireless Studio.”
Installing the software
Notes
• If the older version of Wireless Studio is already
installed in the PC, uninstall it (see page 11).
• Quit all applications before installing the software.
• Be sure to log in as the administrator.
Notes on installation
The installation procedure below describes the operation
on the PC that runs Windows 7. Note that the procedure
may vary according to the operating system.
1
Insert the CD-ROM “Wireless Studio” in your
CD-ROM drive.
2
Click “Start” and then click “Run”.
3
Click “Browse” and then select the CD-ROM drive.
Page 10