2.5
Expansion slot
The barebone server comes with a riser card bracket installed on the 64-bit
expansion slot. You need to remove the bracket if you wish to install a PCI-X
expansion card.
2.5.1
2.5.1
2.5.1
2.5.1
2.5.1
Installing expansion cards
Installing expansion cards
Installing expansion cards
Installing expansion cards
Installing expansion cards
To install a short expansion card:
1.
Use a Phillips (cross) screwdriver
to remove the screw that secures
the riser card to the chassis.
2.
Firmly hold the riser card bracket,
then pull it up to detach it from
the PCI-X slot on the mother-
board.
3.
Remove the screw that secures
the slot metal cover.
4.
Install PCI-X cards to the bracket
as shown, then secure the card
with a screw.
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
2 - 1 1
2 - 1 1
2 - 1 1
2 - 1 1
2 - 1 1